|Min. Hole Size:||0.1 Mm|
|Min. Line Width:||2mil|
|Min. Line Spacing:||2mil|
What is a PCB？
A printed circuit board (PCB) mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.
Printed circuit boards or PCBs, are used to connect electronic components and these boards are commonly used in a wide variety of electronic devices.
PCBs can be single-sided (one copper layer), double-sided (two copper layers on both sides of one substrate layer), or multi-layer (outer and inner layers of copper, alternating with layers of substrate). Multi-layer PCBs allow for much higher component density, because circuit traces on the inner layers would otherwise take up surface space between components.
What is FPC?
FPC = Flexible Printed Circuit.
Flexible printed circuits are also known as flexible circuits, flex circuits, flexible pcbs and sometimes flexible printed circuit boards. Flex circuits are sometimes regarded as a printed circuit board that can flex. In reality there are significant differences when it comes to design, fabrication and functionality.
A flexible printed circuit consists of a metallic layer of traces bonded to a dielectric layer. Copper is a very common metal, but there are other forms of conductive materials used. Thickness of metal layer can be very thin ( <.0001″) to very thick (> .010″). The dielectric layer is usually polyimide or polyester, but other materials can be used. Dielectric thickness can vary from .0005″ to .010″. Often an adhesive is used to bond the metal to the substrate, but other types of bonding such as vapor deposition can be used to attach the metal.
Our PCB Manufacturing services:
Fast PCB Fabrication for Samples and Mass Production
Electronic Components Sourcing Services
PCB Assembly Services: SMT, DIP, BGA...
Stencil, Cable and Enclosure Assembly
Reverse engineering service
Standard Packing and On time Delivery
Frequently Asked Questions:
Q1, what is needed for quotation?
A1, For PCB, you need to provide the Quantity, Gerber file, and Technical requirements, such as material, surface finish treatment, copper thickness, board thickness, etc.
For PCBA, you need to provide the PCB information, BOM, testing documents, etc.
Q2, How fast can you do for the prototype?
A2, 24 hours for 2 layer board, 48 hours for the 4 layer board, and 96 hours for the 6/8/10 layers board.
Q3, How do you ship the boards? What Carrier do you use?
A3, We usually use FedEx, UPS, DHL, but also can use other carrier if customers have special requirement.
Q4, Are My Files Safe?
A4, Of course, We have a policy for the security measures. Your files are protected and complete safe. All documents has never and will never share with any third party.
Q5, Does fast turn have MOQ?
A5, There is no MOQ in Fast Turn. We are able to handle Small as well as large volume production with flexibility.
Your message must be between 20-8000 characters